PHR Dual High-Performance SPAL Fan Kit
PHR is constantly striving to improve the Toyota Supra platform. And on a highly-modified Supra, heat is a problem. With HUGE front mount intercoolers, high idle speeds, heat drenching turbos and high performance motors all saddled with a hot A/C condenser, maintaining reasonable engine temperature is a real problem. Upgraded radiators and fan setups are installed to help to address this problem, but sometimes they still come up short. Airflow must be improved to remove the heat from the motor.To address these problems, PHR is happy to introduce the highest flowing fan setup ever introduced for the Toyota Supra: The PHR Dual High-Performance Spal Fan Kit. Flowing nearly a combined 3500CFM of air, this fan kit dwarfs any other on the planet.At high vehicle speeds as airflow increases to the front of the car, if high pressure is built in front of the fans, bypass flaps open to allow even more airflow through the radiator, furthering cooling even more.The PHR Dual High-Performance Spal Fan Kit comes with a PHR aluminum fan shroud, 2 twelve inch Spal High-Performance Fans, each pulling 1640CFM. Also included is the PHR Fan Control Relay Harness for fan control using simple on/low/high fan speed control.This fan setup is designed to fit the Supra but will require the following modifications:
- Small Battery in stock location or battery relocated to the trunk
- Custom Intercooler Piping to route around fans or preferably run through battery location
Installation is simple using PHR’s wiring harness and PHR’s Fan Control Relay Harness. Simply wire to your aftermarket ecu for full control over the speed of your fans.Â Available in raw finish or select powder coating or polishing options on the fan shroud.Note: If running PHR Dry Sump Kit, one fan will be swapped to a slim fan to accommodate the dry sump drive gear. This will reduce overall airflow but will still be a very large amount of air. Keep this in mind when selecting.Will also fit SC300 with Supra Radiator Installed.