No products in the cart.
1JZ/2JZ ANGLED Front Sump Baffle Box/Surge Plate/Windage Tray RACER version
Roll over image to zoom in
Click to open expanded view
Due to perceived concerns expressed regarding coatings these panels are now supplied in plain metal finish, sprayed with an easily removed rust preventative.
Oil control panels for FRONT sump 1JZ-2JZ Toyota & some Lexus. This is the RACER version, which deletes the factory oil level sensor cut outs for even better oil control. Comes with a block off plate for the oil level sensor aperture in the alloy sump. Please view my other items for the SPORTSMAN VERSION which allows the use of the factory oil level sensor, THIS KIT IS TO SUIT THE ANGLED FRONT SUMP AS DEPICTED IN THE PHOTOS.
The 2JZ engine while being very strong physically has some real problems when it comes to oil control. The sump is a problem, being very shallow & wide both fore & aft with no surge control. The factory panel does nothing to control surge, it’s basically just to prevent the crank from whipping up the sump oil into the rotating assembly. This system is the best available for the factory sump. Whilst not being specifically designed for dedicated drag use, when I designed it I took into account high rates of acceleration and deceleration. The windage tray is an important part of the system allowing windage oil to be stripped from the crank and providing a calmer environment for the oil to deaerate and drain back to the sump proper. YOU ARE PURCHASING THE BAFFLE BOX & SURGE PLATE/WINDAGE TRAY & BLOCK OFF PLATE ONLY. ALL OTHER PARTS ARE FOR ILLUSTRATION ONLY.
Would Suit :
1JZ / 2JZ ANGLED FRONT SUMP
Prior to shipment we will need photos of your EXACT sump you’re are using as between models/series/build dates the sump setups can change