Spool - 2JZ stroker kits

The Spool Toyota 2JZ-GTE 3.2 Litre Stroker Kit includes: - Spool Billet 4340 91mm Stroker Crankshaft - Spool H Beam Forged Connecting Rods with ARP-2000 Bolts - (Spool Drag Pro I Beam Connecting Rods and ARP L19 Bolts available as upgrades) - CP Custom Pistons (rings, pins and locks included) - 9310 0.200" Gudgeon Pins standard (0.250" Pins available as an upgrade) - Full billet 4340 Nitrided and Balanced Crankshaft Please allow approximately 16-20 weeks for pistons, as they are custom ordered in a range of bore sizes and compression ratios. With the increased cubic capacity from the 91mm stroker crank, increases of up to 50% in torque and low to mid-range power are achievable. Boost will come on earlier in the rev range and peak power will increase. Note: If conrod to block interference occurs, slight clearancing may be required. The Spool Toyota 2JZ-GTE 3.4L Stroker Kit includes: - Spool Billet 4340 94mm Stroker Crankshaft - Spool H Beam Forged Connecting Rods with ARP-2000 Bolts - (Spool Drag Pro I Beam Connecting Rods and ARP L19 Bolts available as upgrades) - CP Custom Pistons with rings pins and locks. Pistons can be ordered in any bore size, any compression ratio, and to suit turbo or naturally aspirated applications. - 9310 0.200" Gudgeon Pins standard (0.250" Pins available as an upgrade) - Full billet 4340 Nitrided and Balanced Crankshaft With the increased cubic capacity from the 94mm stroker crank, increases of up to 50% in torque and low to mid-range power are achievable. Boost will come on earlier in the rev range and peak power will increase. Note: If conrod to block interference occurs, slight clearancing may be required.